Macroeconomics 2 Essay Example | Topics and Well Written Essays - 1000 words

Macroeconomics 2 - Essay Example Japan is considered the strongest economy in the Asian region. The Asian economies are dependent on Japanese trade and imports. The earthquake that hit Japan has completely disrupted the entire economy of the island of Japan. The financial markets of Japan have been negatively impacted by the event. The Toyko shares drop by 11% on March 15, 2011 and by 6.2% on Monday March 14, 2011. The total combined drop in value was 17.2%. Along with the news and effects of the earthquake there is currently a lot of speculation due to the nuclear scare the people of Japan are facing. There is a possibility that the damage in the nuclear plants released radiation into the atmosphere which would cause environmental damage to the ecology and to humans. Millions of Japanese inhabitants are at risk of exposure to radiation if the worse scenario becomes a reality. The uncertainty associated with the nuclear condition of Japan is causing panic among the investor community and within the population of Jap an. A major problem that the region of Japan is facing since the earthquake hit them is that its supply chain logistics have been altered. The supplier logistics have been dislocated throughout Japan due to restrictions on using highways for freight has been imposed. When companies are unable to receive raw inventory on time it can cause a firm to suffer from a shutdown. Hundreds of corporations in Japan have close down since the earthquake hit. Along with logistics another problem companies are facing is a lack of stability in its power grid. Electricity shutdowns have been occurring throughout the entire region of Japan. Without electricity companies are unable to produce. Another industry that has been hit hard by the event is the tourism industry. People are scare to travel to Japan right now. Many flights in and out of Japan have been cancelled. Tourism brings in a lot of money because the people that come to Japan spend money during their visit to the nation. There are many so cial aspects that must be considered after the earthquake. The government of Japan has to invest resources in order to find shelter for the thousands of victims that lost their homes. The fact that food and oil prices are high hurts in the recovery process. Higher prices on food will hurt the ability of the government and the non-profit organizations to purchase sufficient food to feed the victims. The medical industry had a huge increase in the demand for its services after the earthquake. Thousands of people were injured as a result of the earthquake. Japan needs the immediate importation of medical professionals in order to meet the demands for medical services as a result of the crisis. The rise in oil prices is another factor that is negatively impacting the Asian economies. A rise in the price of crude oil has inflationary consequences due to the fact that oil has so many derivative products and because virtually all transportation vehicles use gasoline to operate. In the next few months Japan is going to experience a major boom in its construction industry. There is going to be a

Chemistry IA design format Essay Example for Free

Chemistry IA design format Essay 1.0.0- Introduction 1.0.1- Focus Question- If the mass of magnesium reacted with hydrochloric acid is changed will the temperature of the solution increase and the total mass decrease. 1.0.2- Hypothesis- If the mass of magnesium that is reacted with hydrochloric acid is changed the temperature of the solution will increase and the total mass will decrease. 1.0.3- Theory- The reaction between magnesium and hydrochloric reaction is written as follows, Mg(s)+ 2HCL (aq) (MgCl2(aq)+H2 (g) (Ng, 2008, pg 1). This reaction goes through two distinct changes that both have an effect on the energy change in the reaction. Enthalpy refers to changes in energy in a compound (Assut, 2008, pg 1). Two distinct changes can occur. An endothermic change occurs when the energy being absorbed is grater then the energy being released whereas and exothermic change is when the energy being released is greater than the energy being absorbed. Energy is absorbed when bonds are broken and energy is released when they are formed (Newton, 2008, pg1). Energy change cannot be directly measured. However energy change affects the physical force of heat. Therefore a heat change is indicative of an energy change. If the heat increase in the solution the change will be exothermic and if the heat decreases the reaction will be endothermic. In respects to the formula Magnesium forms an ionic bond with chlorine to form the salt magnesium chloride. When this bond is formed energy is released in the form of an endothermic change, this energy drop would be quite small however because the bond is ionic and does not take much energy to create since magnesium and chorine bond easily. However the second change is that hydrogen breaks off from chlorine in the hydrochloric acid and hydrogen is released as a gas. The breaking of bonds would absorb energy therefore forming an exothermic reaction. Hydrogen and chorine however form a very strong covalent bond. Covalent bonds form between atoms with similar electronegative forces and are there for take a lot of energy to break ( Anissimov, 2008, pg 1) Since the endothermic change is weak and the exothermic change is strong it can be predicted that the overall change will be exothermic and therefore the solution will heat up. Temperature change in a chemical reaction can be measured with a device known as a calorimeter. A calorimeter measures the heat of the solution before the reaction has occurred and then again after the reactant has been added (Whel, 2008, pg 1). These two values can be mathematically manipulated to find the relative change in temperature. If two of the same substance have different masses it means there is more of the one substance. In a mass of a substance there is a certain amount of material that can be reacted. By increasing mass the amount of substance that may be reacted increases. Therefore if mass increased the amount that of substance reacted will increase as well providing there is enough of the reactant. This will in turn increase the energy change. Also if more of the substance reacts with the reactant more of the reactant will be used up. This means that if the magnesium is increased there will be more reaction with hydrochloric acid; this means that more hydrogen will be released as gas and the total mass of the solution will decrease. Henceforth the change in heat should be greater if their entire solution is lighter as more of the hydrochloric acid has been reacted and hydrogen lost as a gas. How the reaction works (Figure 1) Mg(s)+ 2HCL (aq) (MgCl2(aq)+H2 (g) 1.1.0- Controlling variables 1.1.1- Variables (Table 1) Variable Type of variable Method for control Mass of magnesium Independent Mass will change for each sample, sample range will be 2g, 4g, 6g, 8g and 10g Heat change Dependent This will be calculated by subtracting the final heat of the solution by the initial heat of the solution. The data will be gathered by using a calorimeter Change in mass in solution Dependent This will be calculated by measuring the weight of the solution and subtracting the weight of the calorimeter and the magnesium. The original mass not including calorimeter and the magnesium will then be subtracted by this value to mind the change of mass in the solution. Initial temperature Controlled The temperature of the solution will be heated to 25c and the reaction started immediately. External temperature Controlled The room temperature will be controlled at 24c Volume of hydrochloric acid Controlled The volume of hydrochloric acid will be 40mls per sample. Measuring apparatus Controlled A 50ml calorimeter with electronic thermometer and a scale with milligram accuracy. Time of experiment Controlled The experiment will be ended when reaction is fully complete and reaction will be given 10 seconds to calibrate before results are taken Replications Controlled Standard 5 replications of each sample will be performed. 1.1.2- Control used in comparison- The reacted samples will be compared against hydrochloric acid with no magnesium that is also 25 degrees Celsius. Since the temperature remains constant there should be no energy or mass change, this would mean that on a graph this would represent a straight line which others samples with energy changes (heat changes) could be compared to. Bibliography Ng, H.N, 2008, Acid reactions, Vat.Gov.Un, Accessed 21/08/09, http://vat.maharashtra.gov.in/communicationcenter/QueryAnswerSubjectwise.php?start=3090subId=0000000007. Asset, M.A, 2008, Chemical Enthalpy, Nasa.gov, Accessed 21/08/09, http://www.grc.nasa.gov/WWW/K-12/airplane/enthalpy.html Newton, R.N, 2008, Energetics and bonding, Unknown sponsor, Accessed 21/08/09, http://www.webchem.net/notes/how_far/enthalpy/enthalpy_diagrams.htm Anissimov, T.A, 2007 Chemical bonding, Simon Frasier University, Accessed 21/08/09, http://www.chem1.com/acad/webtext/chembond/ Whel, L.W, 2006, Calorimeters, Stanford University, Accessed 21/08/09, http://www2.slac.stanford.edu/vvc/detectors/calorimeters.html Acknowledgments The procedure of this experiment is a adaption of a previous class experiment. The source of the procedure is unknown, so thanks to Miss Crook for the inspirations for this design.

Location Analysis Of A Franchise Restaurant :: essays research papers

Location Analysis of a Franchise Resturaunt Problem Statement: Boston Pizza International Inc. is a Canadian owned and operated restaurant. It has many facilities in Canada and has opened facilities in the United States and in Southeast Asia. Boston Pizza is penetrating further into the Canadian market and is opening at a new location on 8th Street in Saskatoon. The chosen location has been the home of many previous restaurant failures. It seems odd that any restaurant would want to open in a location which has proven to be unsuccessful. What characteristics does Boston Pizza have that other restaurants don't have that may allow this location to be successful? This new location will be the second Boston Pizza franchise in Saskatoon, complimenting the facility operating on 50th Street. Will the market areas of these two restaurants overlap? * * * * * The early beginnings of this restaurant occurred in Edmonton, Alberta. In 1963 the first Boston Pizza and Spaghetti House opened. The name of the restaurant is seemingly odd because Boston is the name of a city in the United States, and has nothing to do with a pizza restaurant located in Edmonton. Ron Coyle, the original owner, named the restaurant 'Boston' because the Boston Bruins NHL hockey team was the favorite of the Edmonton area in the 1960's and he wanted his business to use sports as a promotion. Another reason, which may have been more of a coincidence, was that his accountant's surname was Boston ("only way", 37). Boston Pizza and Spaghetti House became a popular restaurant and in 1968 it began to operate as a franchise. In mid-1968, Jim Treliving, a former drum major for the RCMP, and his friend Don Spence bought the franchising rights for British Columbia with the exception of Vancouver. They opened their first unit in Penticton, British Columbia, and in the first year of operation the pizza restaurant grossed $52,000 and the nightclub which was co-located with the restaurant grossed $80,000 (Cameron, 16). Meanwhile, franchise units opened in Edmonton, Winnipeg and Vancouver. As the pizza chain grew, Treliving and George Melville (who had become involved with Treliving's restaurants as a financial planner) became involved in real estate ventures in Hawaii and the Okanagon Valley and also in oil investments in British Columbia (Cameron, 16). In 1983, these two men purchased Boston Pizza Spaghetti House from the original owner Ron Coyle for $3 million. This money was raised from private lenders ("recipe is simple", 16). During that same year, the headquarters of Boston Pizza was moved from Edmonton, Alberta to Richmond, British Columbia where it is found today.

The Age Discrimination in Employment Act of 1967

The Age Discrimination in Employment Act of 1967 is the primary federal statute that prohibits employers from discriminating against employees in terms, privileges and conditions of employment on the basis of age. The law also applies to employment agencies and labor organizations. To be covered by the ADEA, an individual must be 40 years old or older. There is no cap on an employee's age to be covered by the ADEA. What law requires/prohibits Under the ADEA, it is unlawful to discriminate against a person because of his/her age with respect to any term, condition, or privilege of employment, including hiring, firing, promotion, layoff, compensation, benefits, job assignments, and training. It is also unlawful to retaliate against an individual for opposing employment practices that discriminate based on age or for filing an age discrimination charge, testifying, or participating in any way in an investigation, proceeding, or litigation under the ADEA. Who is covered The Age Discrimination in Employment Act of 1967 (ADEA) protects individuals who are 40 years of age or older from employment discrimination based on age. The ADEA’s protections apply to both employees and job applicants. The ADEA applies to employers with 20 or more employees, including state and local governments. It also applies to employment agencies and labor organizations, as well as to the federal government. ADEA protections include: * Apprenticeship Programs  * Job Notices and Advertisements * Pre-Employment Inquiries * Benefits * Waivers of ADEA Rights Reporting/recordkeeping requirements Employers must keep all payroll records for three years. Employers must also keep on file any employee benefit plan (such as pension and insurance plans) and any written seniority or merit system for the full period the plan or system is in effect and for at least one year after its termination How does one make a complaint if they feel the law has been violated? An individual must pre-file a charge with the EEOC within 180 days after the alleged unlawful practice occurred or within 300 days if a state age discrimination law (including remedies) exits.

Responsibility for the murder of King Duncan? Essay

It is hard to decide which of the two characters, Macbeth or Lady Macbeth, holds the most responsibility for the murder of King Duncan, as it is possible to think of both of them being equally to blame. Macbeth and Lady Macbeth are both very ambitious characters and this will be looked at in this essay as part of the analysis of their contribution to Duncan’s murder. This essay will show how Lady Macbeth continuously influences Macbeth and Macbeth follows her every instruction. My essay will discuss both characters’ involvement and it will determine which one is the most culpable for King Duncan’s death. My first point will look at how Lady Macbeth persuades Macbeth to continue developing the plan for King Duncan’s demise. The first time that we see Lady Macbeth playing a part in the murder, is her reaction to the content of Macbeth’s letter. Immediately after reading the letter her initial decision is that, Macbeth must become king and she shows great determination, this can be supported with: â€Å"and shalt be / What thou art promised;† Merely a short time later Lady Macbeth says, â€Å"To catch the nearest way.† By this she means that Macbeth must become king by any means necessary. Yet she is not convinced that Macbeth is capable of committing the crime himself and so she goes onto say she will: â€Å"Pour my spirits in thine ear.† In this she is expressing how she will tell Macbeth what to do, and we can be sure that she is already developing a plan in order to claim the crown, and this can be seen when she says, â€Å"To have thee crowned withal.† Lady Macbeth is also trying to give Macbeth some of her character, as she does not believe that he could commit the murder without her help. The audience can see Lady Macbeth’s language symbolising evil when she says, â€Å"blanket of the dark.† Lady Macbeth wants the blanket to be dark because light would represent God and goodness and not killing Duncan, whereas Lady Macbeth needs darkness and Satan to help her to plan the deed. The blanket represents a cloud obscuring her conscience and preventing her from realising that her intended murder is wrong. Lady Macbeth’s conscience knows that murder is wrong but wants to call upon the supernatural powers to stop her conscience. This makes her guiltier as she understands how wrong the murder is and yet still wants to continue. It is clear that Lady Macbeth has not only got Macbeth’s interests at heart and is fully aware that she would become queen if Macbeth carries out the murder of Duncan. Just before this Lady Macbeth talks of wanting Macbeth to hurry home: â€Å"Hie thee hither,† We can conclude that this means Lady Macbeth wants the assassination to be carried out as soon as possible. During this passage we can clearly see Lady Macbeth for who she really is, and this is the first time that she is introduced to the play and immediately she reveals herself as being a deceitful and malicious character. Macbeth too shows his wicked nature when he looks to the witches for advice and information, and says, â€Å"Stay, you imperfect speakers. Tell me more.† Even though Macbeth knows that the witches are evil and are related to Satan, he wants to know more about the prophecies. Macbeth also feeds lines to Banquo so that Banquo will confirm what Macbeth wants to hear, â€Å"You shall be king.† Macbeth cannot believe that the witches have prophesised that he will become king when he says, â€Å"To be king / Stands not within the prospect of belief,† However what Banquo says does not stop Macbeth’s determination later in the play. Macbeth is desperate to hear more from the witches and to know more about being king, when he says, â€Å"Speak, I charge you.† The witches then disappear, and after the departure Macbeth discovers that another prophecy is found to be true. Macbeth believes the witches and ignores Banquo’s warnings that the prophecies are rooted in evil: â€Å"What, can the devil speak true?† Banquo does not want to have faith in the witches and believes that they are dangerous. In contrast Macbeth believes that he will be king even though the prophecies are a dangerous basis for his actions. Lady Macbeth decides to ignore the danger of the witches when she calls upon supernatural powers to help her: â€Å"Take my milk for gall.† It is clear from this that Lady Macbeth wants to rid her body of anything that may potentially hold her back from committing the deed. Clearly Lady Macbeth is desperate to be able to arrange the murder, and believes that by calling upon supernatural powers it will be possible, when Lady Macbeth says, â€Å"Come, thick night, / And pall thee in the dunnest smoke of hell,† and, â€Å"No compunctious visitings of nature / Shake my fell purpose,† The audience can see Lady Macbeth’s language becoming increasingly evil when she says, â€Å"thick night,† and â€Å"smoke of hell,† Lady Macbeth wants to have a dark night for the deed to occur, so that there is secrecy for the deed. She knows that if the night is dark then she will feel dark inside her and this will help her to perform the murderous action, this is an example of pathetic fallacy. Lady Macbeth says that the smoke is from hell and this represents the passion and desire and her evil desire to work with Satan on this sinful deed. Hell is also described as being torturous and burning, so â€Å"smoke of hell† is very evil language that Lady Macbeth uses. Then when Lady Macbeth hears of King Duncan’s arrival, she does not think of preparations for his stay but of his death: â€Å"He brings great news.† Her murderous plot can now continue, and we also see that Lady Macbeth is unwilling to let destiny take its course and wants to make her own future. This thought continues through the whole play up until the final point where the murder is committed, which can be seen when she says, â€Å"I feel now the future in the instant.† Macbeth also wants to make his own destiny and shows his first thought of murder when he says, â€Å"My thought, whose murder† This is halfway through Macbeth’s speech having just met the three witches, and Macbeth thinks of killing Duncan again when saying, â€Å"Whose horrid image doth unfix my hair.† This idea has not been put into Macbeth’s mind by anyone other than himself. Macbeth becomes very confused and disorientated in his understanding of what is right and what is wrong, shown when he says, â€Å"This supernatural soliciting / Cannot be ill cannot be good.† When saying, â€Å"This supernatural soliciting,† Shakespeare is showing that Macbeth knows that the witches have sought him. However is unsure as to whether he thinks it to be good or bad. Macbeth does not want to be associated with the witches however he also likes the idea of being king and is torn between right and wrong. Right and wrong continue to be blurred in his mind through the play up until Macbeth actually commits the murder of King Duncan. Macbeth is trying to say that what he can imagine is so horrific that it is worse than what could happen in life now, when he says, â€Å"Present fears / Are less than horrible imaginings.† Soon after the three witches have left Macbeth shows a greedy desire: â€Å"Two truths are told,† This particularly gluttonous desire continues throughout the play. Macbeth clearly knows that there would be great results for him, and his wife as a consequence of King Duncan’s demise, and this can be seen when he says, â€Å"With his surcease, success,† However, Macbeth does not think about this much longer as Banquo discourages him for thinking about the prophecies any more when saying, â€Å"Time and hour runs through the roughest day.† Yet Macbeth continues to think of the prophecies when he writes a letter to his wife. Having received the letter from Macbeth, Lady Macbeth chooses the path of persuading Macbeth to bring to an end any doubts about the murder. Firstly her main involvement, which is her consistent influence on Macbeth, Lady Macbeth is questioning Macbeth’s bravery and calling him a coward when saying, â€Å"Wouldst thou have that / Which thou esteem’st the ornament of life,† She then continues to call Macbeth a coward when she goes on to say, â€Å"Live a coward in thine own esteem,† Now Lady Macbeth tries to undermine Macbeth: â€Å"What beast was it then/ That made you break this enterprise to me?† Lady Macbeth is telling Macbeth that she would do anything for him and so he must also, when she says, â€Å"Had I so sworn / As you have done to this.† Lady Macbeth is using a variety of tactics to try and manipulate Macbeth to murder King Duncan, as best she can, which is eventually successful. Once Macbeth is fully coerced to the idea of committing the murder, he still has reservations. Lady Macbeth then reveals that she has schemed a plan and this is when she says, â€Å"What cannot you and I perform upon / Th’unguarded Duncan?† Showing how Lady Macbeth decides that murder is the best option as it is already planned, and that she is so keen on the idea. The whole murder is developed down to whom they shall blame it upon: â€Å"His spongy officers, who shall bear the guilt / of our great quell?† Showing Lady Macbeth’s incredible determination to continue with the murder, despite Macbeth’s worries. However, once Lady Macbeth embeds the plan into Macbeth’s mind, he continues to carry out the murder, following her instructions. This can be seen when Macbeth has a hallucination of a dagger in front of him. Macbeth is very confused when he says, â€Å"A dagger of the mind, a false creation,† and also â€Å"Witchcraft celebrates / Pale Hecate’s off’rings,† His language shows that there is evil within him and it is not just coming from external sources, such as the witches. Macbeth is talking to the dagger, and revealing that it leads him to what he wants to do, to murder King Duncan, when he says, â€Å"Thou marshall’st me the way I was going,† Macbeth knows what he is going to do, when he says, â€Å"On thy blade and dudgeon gouts of blood.† This is his conscience trying to crush the idea, telling him that he is going to commit a murder and that it is morally wrong. â€Å"Horror†, â€Å"fatal vision†, â€Å"bloo dy business† and â€Å"wicked dreams abuse.† The language shows that Shakespeare portrays Macbeth as being absolutely evil, and this is because these words relate to the murder of King Duncan and show that the evil has risen from within Macbeth himself. When Macbeth prepares to commit the murder he has a fear that he may be discovered and that people will realise it was him who murdered King Duncan and not the guards who are to be blamed, this is when he says, â€Å"Hear not my steps, which way they walk,† As Macbeth leaves to commit the murder his last words are, â€Å"Hear it not, Duncan, for it is a knell / That summons thee to heaven or to hell.† Here Macbeth is cold, determined and purposeful, and Macbeth does not show any doubt as he leaves to carry out the deed at the end of the soliloquy. This essay clearly shows which character is most responsible for the demise of Duncan. Evidently Lady Macbeth is responsible in the way that she was determined at all times and only had one momentary doubt throughout the whole play. Looking at the consequences after the murder, Lady Macbeth does go on to kill herself. This illustrates that Lady Macbeth regrets the decision that she made and that she bears the guilt of the murder. In contrast to this Macbeth committed the crime without any doubt even though he had doubted before he was coerced to continue with the murder. Having murdered once Macbeth continued to murder, seeming to have acquired a taste for it, supplying us with the evidence that Macbeth was more responsible for the murder, due to his actually carrying out the deed and continuing to murder other innocent parties without a second thought.

Tips for Salvaging Flood Damaged Photos, Papers Books

Tips for Salvaging Flood Damaged Photos, Papers Books When disasters hit, most people dont mourn the refrigerator or the couch but the loss of precious family photographs, scrapbooks, and memorabilia can be devastating. While it may seem as if theres nothing to be done when faced with piles of soggy, mud-spattered documents, pictures, and other paper items, saving at least some of them may be possible if you follow a few simple steps. How to Save Water-Damaged Photos Most printed photographs, photographic negatives, and color slides can be cleaned and air-dried using the following steps: Carefully lift the photos from the mud and dirty water. Remove them from water-logged albums and separate any that are stuck together, being careful not to rub or touch the wet emulsion of the photo surface.Gently rinse both sides of the photo in a bucket or sink filled with clear, cold water. Do not rub the photos, and change the water frequently.Time is of the essence, so as soon as you can arrange adequate space, lay each wet photo face-up on any clean blotting paper, such as a paper towel. Dont use newspapers or printed paper towels, as the ink may transfer to your wet photos. Change the blotting paper every hour or two until the photos dry. Try to dry the photos indoors if possible, as sun and wind will cause them to curl more quickly.If you dont have time to dry your damaged photos right away, rinse them to remove any mud and debris. Carefully stack the wet photos between sheets of wax paper and seal them in a zipper-type plastic bag. If possible, freeze the photos to inhibit d amage. This way, photos can be defrosted, separated, and air-dried when you have the time to do it properly. More Tips for Handling Water Damaged Photographs Try to get to flood-damaged photos within two days or they will begin to mold or stick together, making it much less likely they can be salvaged.Begin with photographs for which there are no negatives, or for which the negatives are also water damaged.Pictures in frames need to be saved when they are still soaking wet, otherwise, the photo surface will stick to the glass as it dries and you will not be able to separate them without damaging the photo emulsion. To remove a wet photo from a picture frame, keep the glass and photo together. Holding both, rinse with clear flowing water, using the water stream to gently separate the photo from the glass. Note: Some historical photographs are very sensitive to water damage and may not be recoverable. Older or valuable photographs should not be frozen without first consulting a professional conservator. You may also want to send any damaged heirloom photos to a professional photo restorer after drying. Other Paperwork Marriage licenses, birth certificates, favorite books, letters, old tax returns, and other paper-based items can usually be saved after a drenching. The key is to remove the dampness as quickly as possible, before mold  sets in. The simplest approach to salvaging water-damaged papers and books is to lay the damp items on blotting paper to absorb moisture. Paper towels are a good option, as long as you stick to the plain white ones without the fancy prints.  Avoid using newsprint since the ink may run. How to Save Water-Damaged Papers Books As with photos, most papers, documents, and  books can be cleaned and air-dried using the following steps: Carefully remove the papers from the water.If the damage is from dirty flood water, gently rinse the papers in a bucket or sink of clear, cold water. If they are especially fragile, try laying the papers on a flat surface and rinsing with a gentle spray of water.Lay the papers individually on a flat surface, out of direct sunlight. If the papers are soggy, put them in piles to dry out a bit before attempting to separate them. If space is a problem, you can string fishing line across a room and use it as you would a clothesline.Put an oscillating fan in the room where you are drying your papers to increase air circulation and speed the process.For water-logged books, the best option is to place absorbent paper between the wet pages (this is called interleaving) and then lay the books flat to dry. You dont have to place blotter paper  between  every page, just every 20-50 pages or so. Change the blotting paper every few hours.If you have wet papers or books that you just cant deal with right away, seal them in plastic zipper bags and stick them in the freezer. This helps to stop  the deterioration  of the paper and prevents mold from setting in. When cleaning up after a flood or water leak, remember that books and papers dont have to be directly in the water to suffer damage. The increased humidity is enough to trigger the growth of mold. Its important to remove books and papers from a wet location as soon as possible and move them to a location with fans and/or dehumidifiers to speed air circulation and lower humidity. After your papers and books are completely dry, they may still suffer from a residual musty smell. To combat this, place the papers in a cool, dry place for a couple of days. If the musty smell still lingers, put the books or papers in an open box and put that inside a larger, closed container with an open box of baking soda to absorb odors. Be careful not to let the baking soda touch the books, and check the box daily for mold. If your important papers or photos have developed mold and must be discarded, have them copied or digitally scanned before throwing them out.

buy custom Domestic Violence essay

buy custom Domestic Violence essay Man is one of the most perfect creations in the universe and yet one of the most complicated ones. All events that happen around us influence our inner world, and our thoughts and emotions are transforming into our behavior. It is often difficult to establish whether the impact of the environment on the individual is the cause of his or her perception of life, including deviation in behavior, or an individual can change the situation. For this reason, all social problems raise a number of contentious issues, such as determining their nature, identifying the ways of eliminating the consequences, and using the preventive measures among many others. Domestic violence belongs to the most sensitive social issues. At first glance, it seems that everything is clear: there is an offender and a victim in each case. No aspects can be considered. Obviously, justifying the offender is immoral, but not for the social professional. If one wants to create effective service strategies to help the fa mily and prevent the problem, one should answer the question about the reasons behind each case. Such approach to this problem may seem a little strange and unjustified. This paper seeks to show the meaning of social service strategies aimed at communicating with all participants of the domestic violence for preventing such situations in society. It may seem that determination of the all involved is almost impossible because of the diversity of the situations. The evidence demonstrates the opposite. Domestic violence between the intimate partners is one of the most numerous cases of assault. According to the Special Report, such cases account 15% and dominate among all violent victimizations (Truman, 2014). As a result, the spouse or ex-spouse, boyfriends and girlfriends or other intimate partners are the main participants. Obviously, the main reason of this sad statistic is faulty interactions of a couple within a family system or intimate relationship. This mutuality is the object of human service professionals specialty. In this regard, domestic violence prevention service strategies must include some understanding of the different situations causes, such as the context, characteristics, and the history of the family (Wolfe Jaffe, 1999, pp. 134- 135). Such strategies should be aimed at creating an atmosphere of mutual tru st, support and respect, the ability to get rid of negative attitudes and search for a healthy compromise. Special attention with respect to creating and reviving of such atmosphere ought to be paid to the families that have experienced domestic violence for the first time. Only a strategy of crisis intervention can and should help to restore relations that have been broken, normalize mental health of spouses, and prevent relapses (Wolfe Jaffe, 1999, p. 134). At this stage, it is important to work not only with the victim but also with the offender that might seem paradoxical. Person, who did not cope with the self-control once, needs help to understand himself or herself and accept the fact that offensive actions entail punishment and deep insult of relatives. Moreover, the offenders need to learn to live in among people as well as develop the feeling of being an adequate member of society. Lack of such help may provoke the transformation of the temporary aggression in the way of life and bring irreparable consequences. The benefits provided by social services to victims rather than off enders result in the annual growth of the quantity of domestic violence cases. To illustrate, physical abuse against a woman by an intimate partner results in 1.8 million injuries each year (Izadi, 2014). Features mentioned above might be of lower degree of importance if children in such famiilies were not present during the manifestation of violence. The moment of children witnessing the family tragedies is the most painful social trauma in this regard. The research on male batterers shows that the presence of children during the scandals, assaults or batteries influences the ability to trust and regulate emotions, cope with hostile and develop healthy relationships of such children into their adulthood (Wolfe Jaffe, 1999, p. 134). Therefore, the most effective macro-service strategies that promote mental health in the society at large should be associated with special education of children. Such frameworks are supposed to embrace the need for a range of approaches when dealing with different age groups, including teenagers that are the largest at-risk group. It is in this age that unadjusted aggression can be a decisive step towards a future criminal life. Human services profession al is the only person who plays an exceptional role in the implementation of the strategies mentioned above. Specifically, he or she should delicately find the causes of the situation, apply individual approach in every case, and direct the further actions of each member of the family. Therefore, the problem of domestic violence touches closely all its participants and has devastating consequences not only for the victim, but for the aggressor, witnesses and the whole society. Only social service strategies based on the in-depth individual approach to each of the parties involved can prevent the progression of the problem in the social scale. A comprehensive approach and strategies that take into account interests of all stakeholders may offer the best solutions to the acute problems in society. Moreover, such frameworks will lay down sound grounds for designing respective preventive measures that will yield improved quality of life for each person and the family and society at large. Buy custom Domestic Violence essay

6 Job Search Trends Every Job Seeker Should Know

6 Job Search Trends Every Job Seeker Should Know We’re a â€Å"what’s next?† kind of society, and that means that everything has trends- from what we wear to which social media platform just became uncool after everyone’s grandparents signed up. This applies to the job hunt, too. Some things about looking for a job are pretty evergreen- like using active verbs in your resume and dressing in your professional best for an interview- there are trends that could give you an edge. Before you convert your resume to an all-Vine format, consider these less-extreme options for joining the 2016 race.1. Emphasize skills over school.A degree is always going to be a great asset in your application package, but your resume should focus on your hard skills and experience over the school name. The educational landscape is getting more diverse all the time, with online degrees becoming more common, so brand-name schools may be less important than the overall package.2. Find your career community.Not so long ago, general job sites like Monster were all the rage, as one could find all sorts of jobs from pretty much any field. This year, try looking for communities and sites specific to your area, and take advantage of their forums, articles, and meetups to network in your own field. When you’re looking for jobs, try thinking specialized instead of general, and see what you can find.3. Be mobile.If you’re reading this on your phone, this one might not be the advice for you- you’re probably already plugged in. But if you’re still limiting your job search to sites you find on your computer, try using mobile job apps and search tools on your phone or tablet to find opportunities that might not be living in a standard web browser.4. Consider a career jump to a hot industry.In 2016, areas like healthcare (especially healthcare technology), mobile marketing and analytics, and other tech fields are growing at an incredible pace. If you’re looking for a change of pace, take a close look at jobs in those industries that might dovetail with skills you already have.5. Be flexible about work environment.This does not mean you should chase those internet ads that promise you’ll earn $80,000 a month working from home, like my sister’s cousin’s best friend’s cat. However, many companies do offer flexible work arrangements, since so many tasks and meetings can be handled easily via communications tech. A job opportunity in another state might have been a non-starter before, but these days you should take a closer look and see if you actually can live here, but work there.6. Just be flexible.It’s not just the geographic boundaries that are stretching. With companies finding new ways to meet economic challenges, you could find opportunities outside of the 9-to-5 template. That may be freelance openings that help you build relationships, or part-time jobs that help you build experience. Everything is customizable now, and why sh ould your career be any different? If you’re open to change and different ways of doing things, you may discover opportunities you didn’t notice before.2016 could be a great year. If you know which areas where you can jump on the trends and find a way to make them work for you and your professional goals, it could be a year of great changes as well.

Academic Integrity & Plagiarism Essay Example | Topics and Well Written Essays - 750 words

Academic Integrity & Plagiarism - Essay Example Plagiarism becomes unintentional when another human’s ideas as well as statements are portrayed without the aim of representing them as own statements and ideas and failing to properly credit the original source for the ideas and the statements. There is a lot of information available all over the internet and due to lack of restriction on copying and presenting someone else’s work as own has resulted in increased incidents of both accidental and intentional plagiarism. Individuals may even fall for the myth that since the information is so easily available and so widely used, it does not need to be credited to the original source or to the source from which the information has been obtained. Information can be available in various forms, it can be available in form of texts, pictures, print and audio form and all this information needs to be documented in a proper manner to ensure that one does not ends up being held responsible for the act of plagiarism. As stated earlier, there are two forms of plagiarism, the unintentional and the deliberate one. There is no way of avoiding the plagiarism which is deliberate one as it is conducted knowingly. Certain steps are available through which plagiarism which is accidental in nature can be avoided. If an individual is utilizing obtaining and using secondary source of information or information that is already available, an individual has to make sure that he/she uses proper documentation procedure in order to avoid causing plagiarism which is intentional in nature. If an individual utilizes statements directly from someone else’s work, the user of this information has an ethical duty of properly documenting the used statements with the assistance of quotation marks followed by in text citation to provide information regarding the source from which the information was obtained along with the page number of the source. On the other hand if an individual uses some one else’s†™

Issues on Graduating With Student Loan Essay Example | Topics and Well Written Essays - 750 words

Issues on Graduating With Student Loan - Essay Example The critical issue therefore is: Is it worth graduating from the university with educational expenses funded by student loan? In an article written by Andrew Martin (2012) entitled â€Å"Slowly, as Student Debt Rises, Colleges Confront Costs† published online in The New York Times, it was revealed that the president of Ohio University, E. Gordon Gee, was cited to state that â€Å"public colleges and universities need to devise a new business model to pay for the costs of education, beyond sticking students with higher tuition and greater debt† (Martin par. 3). As disclosed, the amounts of student loans have reached a staggering $1 trillion and, in conjunction with economic and financial difficulties, the numbers of borrowers struggling to pay off these debts are just manifesting a parallel rise. Accordingly, â€Å"for the 2009 to 2010 academic year, annual prices for undergraduate tuition, room, and board were estimated to be $12,804 at public institutions and $32,184 at private institutions. Between 1999–2000 and 2009–10, prices for undergraduate tuition, room, and board at public institutions rose 37 percent, and prices at private institutions rose 25 percent, after adjustment for inflation† (Dept. of Education, National Center for Education Statistics 1). ... Average debt per bachelor’s degree recipient increased from $10,600 to $12,400† (American Student Assistance par. 4). One strongly agrees with Mr. Gee’s contention that another alternative course of action must be recommended to solve the student debt problem. From his professional perspective, Gee implements a planned apportionment of $1 billion, classified as inefficiently spent funds for potential redirection towards priorities from the Ohio University’s $5 billion budget over the next five years. Likewise, he focused on revenue generation activities that include privatization of the campus’ parking and pressing donors for additional funds (Martin). Concurrently, college presidents all over the country are â€Å"looking for other ways to pay for education, stepping up private fund-raising, privatizing services, cutting staff, eliminating departments — even saving millions of dollars by standardizing things like expense forms† (Martin par. 6). Other proposals to solve the student loan crisis were highlighted by Sandra Block and Christine Dugas (2012), whose report entitled â€Å"Five proposals to solve student loan crisis†, included options such as recommending a bankruptcy reform; implement student loan forgiveness; increase Pell grants; linking federal educational aids to affordability; and by educating the borrowers. From among those noted, one believes that educating the borrowers would address the root cause of the dilemma but would not immediately address and assist in solving the repayment of the current student loan crisis. Is it worth graduating from the university with educational expenses funded by student loan? Looking at the dilemma from the students’ points of views, the most plausible solution

Criminal Justice Bachelor Essay Example | Topics and Well Written Essays - 1250 words

Criminal Justice Bachelor - Essay Example 7. He retained the wallet until he returned home from school for lunch that afternoon. 8. At that time he gave the wallet to his father, a white male aged 40. 9. The father went to the victim's apartment at 2:50 p.m. and gave the wallet to the victim's mother. 10. When the mother called the day care center to inform her daughter about the wallet, she learned that her daughter had not appeared for work that morning. 11. The mother, the victim's sister, and a neighbor began a search of the building and discovered the body. 12. The neighbor called the police. Police at the scene found no witnesses who saw the victim after she left her apartment that morning. No one heard any screams. B. Forensic Examination 1. The medical examiners report was important in determining the extend of the wounds, as well as how the victim was assaulted and whether evidence of sexual assault was present or absent. 2. No semen was noted in the vagina, but semen was found on the body. 3. It appeared the murderer stood directly over the victim and masturbated. 4. There were visible bite marks on the victim's thighs and knee area. He cut off her nipples with a knife after she was dead and wrote on the body. 5. Cause of death was strangulation, first manual, then ligature, with the strap of her purse. 6. There were no deep stab wounds. 7. The killer used the victim's belts to tie her right arm and right leg but apparently had untied them in order to position the body before he left. C. Evidence present that belonged to the offender 1. Umbrella, inkpen and a hair comb 2. Semen 3. Feces D. What evidence was not present 1. Blunt force object the killed the victim 2. The Chi charm and chain 3. Victims purse E. Typology of the Crime. - 1....Focusing on the physical attributes of offenders, their criminal histories, and criminal motivations, Ferri (1917) identified five types ofcriminals: 3. Other researchers have developed typologies and classification systems that derive from offenders' personal attributes. For example, Sheldon (1949) classified individuals according to their body physique-endomorphic, mesomorphic, or ectomorphic. The major assumption underlying this approach is that there is a strong association between physique and temperament, with mesomorphic body builds linked with a higher likelihood of aggressive and criminal behavior. 5. Offender classifications based on mental disorders and personality traits have been the mainstay of clinical psychologists and psychiatrists. From this perspective, criminal typologies have been associated with the identification of single personality traits and groups of traits. Clinical labels like "impulsive," "antisocial," "neurotic," and "psychotic," are often used to distinguish differences within and between types of offenders. 7. The crime's style is a single homicide. The murderer's intent was to slowly destroy a handicapped Jewish girl. He is biased against Jews because he ripped off the chi. And while he ripped off the chi, he had no desire to actually touch the victim.

What anti-smoking ordinances are in effect in your community Assignment

What anti-smoking ordinances are in effect in your community - Assignment Example The smoking ordinances in our community define smoking as the smoking of tobacco including cigarettes, and all other products related to tobacco. Prohibition of tobacco products is therefore prohibited in places of accommodation and entertainment, places of work, public places, parks and buildings, public vehicles and any other means of public transport, social areas such as bars and restaurants. The ordinances allow the involved parties to put up posters restricting smoking in these places. The smoking ordinances however define the allowed smoking areas in commercial and business places where smoking is allowed. These places are designed to be away from other people. Smokers can therefore visit these places and smoke without any fines being imposed on them. The anti –smoking force further allow the people who serve at these places to act as their supervisors and report any persons who are found smoking in these areas. The school in addition has rules and regulations that prohibit smoking around the campus. These rules prevent people from smoking around the campus area and impose a fine to those that are found smoking. The effectiveness of the rule is ensured by putting up posters that indicate that people are not allowed to smoke. The rule has been effective with many people having to pay the fines due to smoking. Others have learned from the experience of those that have already paid the fines and thus are able to refrain from smoking. The main advantage attained in support of the regulation is the health benefit that arises from absence of smoking (Mitchell 202). These are instances such as a notable decline in the levels of harmful compounds in the air, resulting to reduction in the levels of air pollution which in turn has resulted to significant reduction in heart attack levels. Cases of respiratory problems as

Camera Essay Example | Topics and Well Written Essays - 1250 words

Camera - Essay Example The high creativity and innovation of new cameras such as smart phones, which have numerous uses apart from taking photographs may lead to the decline of sales and profits reaped by camera companies (Kurtz 79). This indicates that the product has reached the decline stage, and it may become extinct if the innovation of new photo taking gadgets continues. Introduction Stage This is the stage when the product enters the market the first time, and firms reap low sales and profits because they conduct intense marketing to attract customers (Kurtz 30). The camera was first introduced in the market during the proto globalization period that began in the sixteenth century. Human intelligence increased during this period leading to the invention of various objects such as the wheel and the camera. The first camera, known as obscura, took inverted images that were not saved on any material. The object was as big as a house, and it allowed photographs of one person only. The camera had a hole through which light passed and formed inverted images of the objects in front of the gadget. The images taken by the camera were unclear and unattractive. The inventors of the product later developed portable cameras that increased the need for photography in the world (Joanne 65). Image of the first camera obscura (writtenshots.wordpress.com) Image taken using camera obscura (fineartamerica.com) Growth Stage The growth stage is the second phase of product development, which involves increases in sales and profits. Organizations reap higher benefits in this stage than in the introductory phase because of the incoming of new customers. During this stage, new firms begin producing the good so that they can reap the high profits and sales in the industry (Kurtz 84). In the introductory stage of the camera, Kodak was the only company that produced the product. However, new companies such as Nixxon and Sony entered the industry. The growth stage also involves the addition of features to the products to make them more attractive to existing customers. The additional features also help companies in attracting new users, and this enables them to recover they capital they invest in the production of the good. Eastman, the director of Kodak developed the camera by enabling the saving of images in films. The films were of limited length meaning that they would save a limited number of images. Users of the camera went back for film refilling to the companies where they bought the product when the existing space finished. The images saved on the films were also produced by the producing companies when there was no additional space in a film (Joanne 76). This meant that customers would wait for numerous days to view their pictures. The photographs taken using the film cameras were not also clear; although they were better than those of the obscura. The film camera (www.retrothing.com) Image taken using the film camera (www.shootingfilm.net) Instant cameras were also develop ed during the growth stage of the product life cycle. This is the camera that enabled consumers to recover their photographs immediately. Users did not have to wait for days or months to see their photographs like they did with the film camera (Joanne 93). The invention of this camera increased the sales of Kodak and other companies in the industry. This is because they attracted new customers and recovered sales from those who were dissatisfied by the extensive periods taken to produce

What anti-smoking ordinances are in effect in your community Assignment

What anti-smoking ordinances are in effect in your community - Assignment Example The smoking ordinances in our community define smoking as the smoking of tobacco including cigarettes, and all other products related to tobacco. Prohibition of tobacco products is therefore prohibited in places of accommodation and entertainment, places of work, public places, parks and buildings, public vehicles and any other means of public transport, social areas such as bars and restaurants. The ordinances allow the involved parties to put up posters restricting smoking in these places. The smoking ordinances however define the allowed smoking areas in commercial and business places where smoking is allowed. These places are designed to be away from other people. Smokers can therefore visit these places and smoke without any fines being imposed on them. The anti –smoking force further allow the people who serve at these places to act as their supervisors and report any persons who are found smoking in these areas. The school in addition has rules and regulations that prohibit smoking around the campus. These rules prevent people from smoking around the campus area and impose a fine to those that are found smoking. The effectiveness of the rule is ensured by putting up posters that indicate that people are not allowed to smoke. The rule has been effective with many people having to pay the fines due to smoking. Others have learned from the experience of those that have already paid the fines and thus are able to refrain from smoking. The main advantage attained in support of the regulation is the health benefit that arises from absence of smoking (Mitchell 202). These are instances such as a notable decline in the levels of harmful compounds in the air, resulting to reduction in the levels of air pollution which in turn has resulted to significant reduction in heart attack levels. Cases of respiratory problems as

The Level of Customer Satisfaction of Grameen Phone Limited Dissertation

The Level of Customer Satisfaction of Grameen Phone Limited - Dissertation Example 1.0 Introduction 1.1 GENERAL INTRODUCTION The academic program is the building up of the theoretical knowledge about business administration, which is the base of practical knowledge. The program is an attempt to provide the business students an orientation to a real life business situation in which we can observe and evaluate the use and applicability of the theoretical concepts, which were taught in the classrooms. As per norm this report is the requirement of the fulfillment of the internship program. This report titled â€Å"Assessing the Level of Customer Satisfaction of Grameenphone.† 1.2 OBJECTIVES: 1.2.1 Primary Objectives ïÆ'Ëœ To discuss about telecommunication business in Bangladesh. ïÆ'Ëœ To present a background and introduction of Grameenphone Ltd. ïÆ'Ëœ To focus on the business and operations of the company. ïÆ'Ëœ To discuss about the activity of the Customer Service Division of Grameenphone Ltd. ïÆ'Ëœ Compare other operators with Grameenphone Ltd. ïÆ'Ëœ To focus on the most resent after sales service improvement and market position of Grameenphone Ltd. ïÆ'Ëœ To find out the satisfaction level of Grameenphone subscribers. ïÆ'Ëœ To specify the areas of dissatisfaction of the Grameenphone users. ïÆ'Ëœ Identify the findings of analysis and recommend based on the findings. 1.2.2 Secondary Objectives: ïÆ'Ëœ To have knowledge on Grameenphone Ltd. and mobile industry. ïÆ'Ëœ To improve corresponding and report writing ability. 1.3 SCOPE The scope of the study is limited within the telecommunication industry of Bangladesh. It is also limited within the organization of Grameenphone, especially in the Customer Service Division of the company. Here I discussed with the topics related to the after sales customer satisfaction of Grameenphone Ltd. 1.4 Significance of the study GP knows that in near future, the sell will sluggish down and all the activities will occur through targeting the after sell services. And for that GP always wants to give their priority to this sector. All the activities GrameenPhone Ltd. based on their service. Mobile operators are mainly selling their service to their customers. And in that competition Grameen Phone provides best quality service to their customers. So being an employee of GrameenPhone Ltd. it's an honor to find out the customer satisfaction level. However today the competition is raising and it's create an opportunity to the customers for choose better one. As a result the telecom organizations are now not only looking for capture new customer but also retain the present and past customers too. For that they are now completely focus on their service level. So it's very important for GrameenPhone Ltd. to keep their service level up always as they did previous. The rationale of this study is to

Investment Property Essay Example for Free

Investment Property Essay The objective of this Standard is to prescribe the accounting treatment for investment property and related disclosure requirements. Investment property is property (land or a building—or part of a building—or both) held (by the owner or by the lessee under a finance lease) to earn rentals or for capital appreciation or both, rather than for: (a) use in the production or supply of goods or services or for administrative purposes; or (b) sale in the ordinary course of business. A property interest that is held by a lessee under an operating lease may be classified and accounted for as investment property provided that: (a) the rest of the definition of investment property is met; (b) the operating lease is accounted for as if it were a finance lease in accordance with IAS 17 Leases; and (c) the lessee uses the fair value model set out in this Standard for the asset recognised. Investment property shall be recognised as an asset when, and only when: (a) it is probable that the future economic benefits that are associated with the investment property will flow to the entity; and (b) the cost of the investment property can be measured reliably. An investment property shall be measured initially at its cost. Transaction costs shall be included in the initial measurement. The initial cost of a property interest held under a lease and classified as an investment property shall be as prescribed for a finance lease by paragraph 20 of IAS 17, ie the asset shall be recognised at the lower of the fair value of the property and the present value of the minimum lease payments. An equivalent amount shall be recognised as a liability in accordance with that same paragraph. The Standard permits entities to choose either: (a) a fair value model, under which an investment property is measured, after initial measurement, at fair value with changes in fair value recognised in profit or loss; or (b) a cost model. The cost model is specified in IAS 16 and requires an investment property to be measured after initial measurement at depreciated cost (less any accumulated impairment losses). An entity that chooses the cost model discloses the fair value of its investment property. Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. An investment property shall be derecognised (eliminated from the statement of financial position) on disposal or when the investment property is permanently withdrawn from use and no future economic benefits are expected from its disposal. Gains or losses arising from the retirement or disposal of investment property shall be determined as the difference between the net disposal proceeds and the carrying amount of the asset and shall be recognised in profit or loss (unless IAS 17 requires otherwise on a sale and leaseback) in the period of the retirement or disposal.

Exploring The Chemistry Of Textiles Chemistry Essay

Exploring The Chemistry Of Textiles Chemistry Essay Textile chemistry is primarily an applied form of chemistry. It is a highly specialized field that applies the principles of the basic fields of chemistry to the understanding of textile materials and to their functional and esthetic modification into useful and desirable items. Textile materials are used in clothing, carpet, tire yarn, sewing thread, and air bags. Some textile chemists are less oriented toward manufacturing processes and more focused toward fiber technologies. The study of textile chemistry begins with the knowledge of fibers themselves-both natural and synthetic. Because synthetic fibers are such an important part of todays textile business, the field includes many who are trained as polymer chemists. The interaction between textile chemistry and materials science is also increasing. Textile chemistry includes the application of the principles of surface chemistry to cleaning processes and modifications such as dyeing and finishing. It relates organic chemistry in the synthesis and formulation of the products used in these processes. 2. is dynamic Traditionally, textile chemists have been trained to have an in-depth understanding of the structure and properties of natural and synthetic fibers, says Norman Nemerov, professor of chemistry at the Philadelphia College of Textiles and Sciences. They have also been taught the post-treatment chemistries, which impart properties such as dye ability, wash freshness, and permanent press. But today there are new demands, such as recyclability. One thing were looking at is how to make fibers degradable over time, he says. And, in a relatively new area called biotextiles, fibers are being developed for drug delivery systems, Nemorov adds. Weaving, dyeing, and finishing cloth is an ancient art, but its also a modern science, says Fred Miller, vice president of Hickory Dyeing and Winding Company. Jim Hammond, a senior research associate in nylon research and development at Dupont, comments, I often say that if I took a two-year trip around the world, my knowledge would be obsolete by the time I came back. Miller said, The field is exciting because theres still so much to know and to learn. After many years in the business, both Hammond and Miller still find their work creative and intellectually challenging. 3. Brings older technology up to date While new technology abounds, the most commonly used fibers have been around for a long time. But, chemists working with these materials are often focused on modifying them for new applications. Sushma Kitchloo, a polymer chemist at Globe Manufacturing, is responsible for new product development and troubleshoots problems associated with modification of polymers Millers expertise is in the interaction between fibers and the dyes that give them color and luster. Modifying traditional polymers requires adjusting the chemical processes for downstream functions, such as dyeing the fiber. 4. is tangible In textiles, you are working with something you can hold and feel. says Ehrhardt. The skill set for this field includes understanding process manufacturing, being familiar with physical testing of fibers, having knowledge of weaving and knitting, and understanding the evolution of a product through garment form. Specializing in the field of textile chemistry can provide opportunities for dynamic and creative applications of chemistry. A textile chemist relates knowledge of the organic structures of both fibers and the chemicals used to modify them to specific chemical, physical, and esthetic properties. The combination of the theoretical and the practical makes possible the development of the thousands of textile chemicals necessary for the production of the finished articles of commerce. Textile:- Textile is a flexible material consisting of a network of natural or artificial fibres often referred to as thread or yarn. Yarn is produced by spinning raw wool fibres, linen, cotton, or other material on a spinning wheel to produce long strands known as yarn. Textiles are formed by weaving, knitting, crocheting, knotting, or pressing fibres together . The words fabric and cloth are used in textile assembly trades (such as tailoring and dressmaking) as synonyms for textile. However, there are subtle differences in these terms. Textile refers to any material made of interlacing fibres. Fabric refers to any material made through weaving, knitting, crocheting, or bonding. Cloth refers to a finished piece of fabric that can be used for a purpose such as covering a bed. Textile Chemistry Terminology Performance fabrics offer special benefits to consumers, such as stain-repellency, wrinkle-resistance, or odor-control. New technologies are launched every year. CCRC is committed to keeping ahead of the technology curve, assuring that consumers will be satisfied with the home care of the fabrics, as well as performance. Antimicrobial Agent (AM) A chemical compound either destroys or inhibits the growth of microscopic and submicroscopic organisms. Flame Resistant (FR) The characteristic of a fabric to resist ignition and to self extinguish if ignited. Flammability The ability of a material or product to burn with a flame under specified test conditions. Hydrophilic Water loving; having a high degree of moisture absorption or attraction. Hydrophobic Water repelling; having a low degree of moisture absorption or attraction. Resiliency Ability of a fabric to return to its original shape after compressing, bending or other deformation. Reusable Protective Clothing Garments which are capable of withstanding a maintenance procedure to remove soil and other contaminants yet retain the garments protective characteristic. Stoll Curve Developed by Alice Stoll in 1960s it is used in many tests to predict the thermal protective performance of textile materials for FR apparel. It is essentially a plot of thermal energy and time predicted to cause a pain sensation, or a second degree burn, in human tissue. Waterproof Ability of a fabric to be fully resistant to penetration by water. Example: rain coat. History Late antique textile, Egyptian, now in the Dumbarton Oaks collection. The production of textiles is an important craft, whose speed and scale of production has been altered almost beyond recognition by industrialization and the introduction of modern manufacturing techniques. However, for the main types of textiles, plain weave, twill or satin weave, there is little difference between the ancient and modern methods. Incans have been crafting quipus (or khipus) made of fibres either from a protein, such as spun and plied thread like wool or hair from camelids such as alpacas, llamas and camels or from a cellulose like cotton for thousands of years. Khipus are a series of knots along pieces of string. They have been believed to only have acted as a form of accounting, although new evidence conducted by Harvard professor, Gary Urton, indicates there may be more to the khipu than just numbers. Preservation of khipus found in museum and archive collections follow general textile preservation principles and practice. Metal fibre, metal foil, and metal wire have a variety of uses, including the production of cloth-of-gold and jewelry. Hardware cloth is a coarse weave of steel wire, used in construction. Sources and types [Traditional Romanian fabric] Textiles can be made from many materials. These materials come from four main sources: animal, plant, mineral, and synthetic. In the past, all textiles were made from natural fibres, including plant, animal, and mineral sources. In the 20th century, these were supplemented by artificial fibres made from petroleum. Textiles are made in various strengths and degrees of durability, from the finest gossamer to the sturdiest canvas. The relative thickness of fibres in cloth is measured in deniers. Microfibre refers to fibres made of strands thinner than one denier. Animal textiles Animal textiles are commonly made from hair or fur. Wool refers to the hair of the domestic goat or sheep, which is distinguished from other types of animal hair in that the individual strands are coated with scales and tightly crimped, and the wool as a whole is coated with an oil known as lanolin, which is waterproof and dirtproof. Woollen refers to a bulkier yarn produced from carded, non-parallel fibre, while worsted refers to a finer yarn which is spun from longer fibres which have been combed to be parallel. Wool is commonly used for warm clothing. Cashmere, the hair of the Indian cashmere goat, and mohair, the hair of the North African angora goat, are types of wool known for their softness. Angora refers to the long, thick, soft hair of the angora rabbit Other animal textiles which are made from hair or fur are alpaca wool, vicuà ±a wool, llama wool, and camel hair, generally used in the production of coats, jackets, ponchos, blankets, and other warm coverings. Angora refers to the long, thick, soft hair of the angora rabbit. Wadmal is a coarse cloth made of wool, produced in Scandinavia, mostly 1000~1500CE. Silk is an animal textile made from the fibres of the cocoon of the Chinese silkworm. This is spun into a smooth, shiny fabric prized for its sleek texture. Silk Silk is a natural protein fiber, some forms of which can be woven into textiles. The best-known type of silk is obtained from cocoons made by the larvae of the silkworm Bombyx mori reared in captivity (sericulture). The shimmering appearance for which silk is prized comes from the fibres triangular prism-like structure which allows silk cloth to refract incoming light at different angles. Silk is also the strongest natural fiber known to man. The length of the silk fiber depends on how it has been prepared. Since the cocoon is made of one strand, if the cocoon is unwound carefully the fibers can be very long. Wool Wool is the fiber derived from the fur of animals of the Caprinae family, principally sheep, but the hair of certain species of other mammals such as goats, alpacas, and rabbits may also be called wool. Alpaca Alpaca fiber is that of an alpaca. It is warmer than sheeps wool and lighter in weight. It is soft, fine, glossy, and luxurious. The thickness of quality fiber is between 12-29 micrometres. Most alpaca fiber is white, but it also comes in various shades of brown and black. Angora Angora wool or Angora fiber refers to the downy coat produced by the Angora rabbit. Angora is prized for its softness, thin fibers of around 12-16 micrometres for quality fiber, and what knitters refer to as a halo (fluffiness). The fiber felts very easily. Angora fiber comes in white, black, and various shades of brown. Cashmere Cashmere wool is wool obtained from the Cashmere goat. Cashmere is characterized by its luxuriously soft fibers, with high napability and loft. In order for a natural goat fiber to be considered Cashmere, it must be under 18.5 micrometers in diameter and be at least 3.175 centimeters long. It is noted as providing a natural light-weight insulation without bulk. Fibers are highly adaptable and are easily constructed into fine or thick yarns, and light to heavy-weight fabrics. Sheeps wool Wool has two qualities that distinguish it from hair or fur: it has scales which overlap like shingles on a roof and it is crimped; in some fleeces the wool fibers have more than 20 bends per inch. Wool varies in diameter from below 17 micrometres to over 35 micrometres The finer the wool, the softer it will be, while coarser grades are more durable and less prone to pilling. Plant textiles Grass, rush, hemp, and sisal are all used in making rope. In the first two, the entire plant is used for this purpose, while in the last two, only fibres from the plant are utilized. Coir (coconut fibre) is used in making twine, and also in floormats, doormats, brushes, mattresses, floor tiles, and sacking. Straw and bamboo are both used to make hats. Straw, a dried form of grass, is also used for stuffing, as is kapok. Fibres from pulpwood trees, cotton, rice, hemp, and nettle are used in making paper. Cotton, flax, jute, hemp and modal are all used in clothing. Pià ±a (pineapple fibre) and ramie are also fibres used in clothing, generally with a blend of other fabrics such as cotton. Acetate is used to increase the shininess of certain fabrics such as silks, velvets, and taffetas. Seaweed is used in the production of textiles. A water-soluble fibre known as alginate is produced and is used as a holding fibre; when the cloth is finished, the alginate is dissolved, leaving an open area Tencel is a man-made fabric derived from wood pulp. It is often described as a man-made silk equivalent and is a tough fabric which is often blended with other fabrics cotton for example. Mineral textiles or vinyl tiles, sheeting, and adhesives, transite panels and siding, acoustical ceilings, stage curtains, and fire blankets. Glass Fibre is used in the production of spacesuits, ironing board and mattress covers, ropes and cables, reinforcement fibre for composite materials, insect netting, flame-retardant and protective fabric, soundproof, fireproof, and insulating fibres. Metal fibre, metal foil, and metal wire have a variety of uses, including the production of cloth-of-gold and jewelry. Hardware cloth is a coarse weave of steel wire, used in construction. Synthetic textiles [A variety of contemporary fabrics. From the left: evenweave cotton, velvet, printed cotton, calico, felt, satin, silk, hessian, polycotton.] All synthetic textiles are used primarily in the production of clothing. Polyester fibre is used in all types of clothing, either alone or blended with fibres such as cotton. Aramid fibre (e.g. Twaron) is used for flame-retardant clothing, cut-protection, and armor. Acrylic is a fibre used to imitate wools, including cashmere, and is often used in replacement of them. Nylon is a fibre used to imitate silk; it is used in the production of pantyhose. Thicker nylon fibres are used in rope and outdoor clothing. Nylons are condensation copolymers formed by reacting equal parts of a diamine and a dicarboxylic acid, so that peptide bonds form at both ends of each monomer in a process analogous to polypeptide biopolymers. Chemical elements included are carbon, hydrogen, nitrogen, and oxygen. . The most common variant is nylon 6-6 which refers to the fact that the diamine (hexamethylene diamine) and the diacid (adipic acid) each donate 6 carbons to the polymer chain. Spandex (trade name Lycra) is a polyurethane fibre that stretches easily and can be made tight-fitting without impeding movement. It is used to make activewear, bras, and swimsuits. Olefin fibre is a fibre used in activewear, linings, and warm clothing. Olefins are hydrophobic, allowing them to dry quickly. A sintered felt of olefin fibres is sold under the trade name Tyvek. Ingeo is a polylactide fibre blended with other fibres such as cotton and used in clothing. It is more hydrophilic than most other synthetics, allowing it to wick away perspiration The most common types of microfibers are made from polyesters, polyamides (nylon), and or a conjugation of polyester and polyamide.The shape, size and combinations of synthetic fibers are selected for specific characteristics, including: softness, durability, absorption, wicking abilities, water repellency, electrodynamics, and filtering capabilities. Names Characteristics Major Domestic and Industrial Uses ACETATE Luxurious feel and appearance Wide range of colors and lusters Excellent drapability and softness Relatively fast-drying Shrink-, moth-, and mildew-resistant Apparel: Blouses, dresses, and foundation garments. lingerie, linings, shirts, slacks, sportswear. Fabrics: Brocade, crepe, double knits, faille, knitted jerseys, lace, satin, taffeta, tricot. Home Furnishings:Draperies, upholstery. Other:Cigarette filters, fiberfill for pillows, quilted products ACRYLIC Soft and warm Wool-like Retains shape Resilient Quick-drying Resistant to moths, sunlight, oil and chemicals Apparel:Dresses, infant wear, knitted garments, ski wear, socks, sportswear, sweaters. Fabrics:Fleece and pile fabrics, face fabrics in bonded fabrics, simulated furs, jerseys. Home Furnishings:Blankets. carpets, draperies, upholstery. Other:Auto tops, awnings, hand-knitting and craft yarns, industrial and geotextile fabrics. ARAMID Does not melt Highly flame-resistant High strength High resistance to stretch Maintains its shape and form at high temperatures Hot-gas filtration fabrics, protective clothing, military helmets, protective vests, structural composites for aircraft and boats, sailcloth, tires, ropes and cables, mechanical rubber goods, marine and sporting goods. MELAMINE White and dyeable Flame resistance and low thermal conductivity High heat dimensional stability Process able on standard textile equipment Fire Blocking Fabrics:Aircraft seating, fire blockers for upholstered furniture in high-risk occupancies (e.g., to meet California TB 133 requirements) Protective Clothing:Firefightersturnout gear, insulating thermal liners, knit hoods, molten metal splash apparel. NAMES CHARACTERSTICS USES NYLON Exceptionally strong Supple Abrasion-resistant Lustrous Easy to wash Resists damage from oil and many chemicals Resilient Low in moisture absorbency Apparel:Blouses, dresses, foundation garments, hosiery, lingerie and underwear, raincoats, ski and snow apparel, suits, windbreakers. Home Furnishings: Bedspreads, carpets, draperies, curtains, upholstery. Other: Air hoses, conveyor and seat belts, parachutes, racket strings, ropes and nets, sleeping bags, tarpaulins, tents, thread, tire cord, geotextiles. OLEFIN Unique wicking properties that make it very comfortable Abrasion-resistant Quick-drying Resistant to deterioration from chemicals, mildew, perspiration, rot, and weather Sensitive to heat Soil resistant Strong; very lightweight Excellent colorfastness Apparel: Pantyhose, underwear, knitted sports shirts, mens half hose, mens knitted sportswear, sweaters. Home Furnishings:Carpet and carpet backing, slipcovers, upholstery. Other:Dye nets, filter fabrics, laundry and sandbags, geotextiles, automotive interiors, cordage, doll hair, industrial sewing thread. POLYESTER Strong Resistant to stretching and shrinking Resistant to most chemicals Quick-drying Crisp and resilient when wet or dry Wrinkle- and abrasion-resistant Retains heat-set pleats and creases Easy to wash Apparel:Blouses, shirts, career apparel, childrens wear, dresses, half hose, insulated garments, ties, lingerie and underwear, permanent press garments, slacks, suits. Home Furnishings:Carpets, curtains, draperies, sheets and pillow cases. Other:Fiberfill for various products, fire hose, power belting, ropes and nets, tire cord, sail, V-belts. PBI Highly flame resistant Outstanding comfort factor combined with thermal and chemical stability properties Will not burn or melt Low shrinkage, when exposed to flame. Suitable for high-performance protective apparel such as firemens turnout coats, astronaut space suits and applications where fire resistance is important. NAMES CHARACTERISTICS USES RAYON Highly absorbent Soft and comfortable Easy to dye Versatile Good drapability Apparel: Blouses, coats, dresses, jackets, lingerie, linings, millinery. rainwear, slacks, sports shirts, sportswear, suits, ties, work clothes. Home Furnishings:Bedspreads, blankets, carpets, curtains, draperies, sheets, slipcovers, tablecloths, upholstery. Other: Industrial products, medical, surgical products, non-woven products, tire cord. SPANDEX Can be stretched 500 percent without breaking Can be stretched repeatedly and recover original length Light-weight Stronger and more durable than rubber Resistant to body oils Articles (where stretch is desired):Athletic apparel, bathing suits, delicate laces, foundation garments, golf jackets, ski pants, slacks, support and surgical hose. Production Methods:- Textile Manufacturing:- The manufacture of textiles is one of the oldest of human technologies. In order to make textiles, the first requirement is a source of fibre from which a yarn can be made, primarily by spinning. (Both fibre and fiber are used in this article.) The yarn is processed by knitting or weaving, which turns yarn into cloth. The machine used for weaving is the loom. For decoration, the process of colouring yarn or the finished material is dyeing. For more information of the various steps, see textile manufacturing.. Typical textile processing includes 4 stages: yarn formation, fabric formation, wet processing, and fabrication. The three main types of fibers include natural vegetable fibers (such as cotton, linen, jute and hemp), man-made fibers (those made artificially, but from natural raw materials such as rayon, acetate, Modal, cupro, and the more recently developed Lyocell), synthetic fibers (a subset of man-made fibers, which are based on synthetic chemicals rather than arising from natural chemicals by a purely physical process) and protein based fi 1. Hand processing: yarn formation Wool Flax 2. Machine Processing: yarn formation Cotton Cotton Gin Picking Carding Combining the Slivers Spinning Plying Yucca Leaf to Rolag 3. Hand Processing- Fabric Formation Knitting Crochet Lace Weaving Loom Process 4HYPERLINK http://en.wikipedia.org/wiki/Textile_manufacturing#Machine_processing:_fabric_formation#Machine_processing:_fabric_formation HYPERLINK http://en.wikipedia.org/wiki/Textile_manufacturing#Machine_processing:_fabric_formation#Machine_processing:_fabric_formationMachine processing: fabric formation Knitting Lace Weaving 5HYPERLINK http://en.wikipedia.org/wiki/Textile_manufacturing#Decoration#Decoration HYPERLINK http://en.wikipedia.org/wiki/Textile_manufacturing#Decoration#DecorationDecoration Dyeing 5.2HYPERLINK http://en.wikipedia.org/wiki/Textile_manufacturing#Bleaching#Bleaching HYPERLINK http://en.wikipedia.org/wiki/Textile_manufacturing#Bleaching#BleachingBleaching 5.3HYPERLINK http://en.wikipedia.org/wiki/Textile_manufacturing#Embroidery#Embroidery HYPERLINK http://en.wikipedia.org/wiki/Textile_manufacturing#Embroidery#EmbroideryEmbroidery Textile printing Design for a hand woodblock printed textile, showing the complexity of the blocks used to make repeating patterns. Evenlode by William Morris, 1883. Evenlode block-printed fabric. Textile printing is the process of applying colour to fabric in definite patterns or designs. In properly printed fabrics the colour is bonded with the fiber, so as to resist washing and friction. Textile printing is related to dyeing but, whereas in dyeing proper the whole fabric is uniformly covered with one colour, in printing one or more colours are applied to it in certain parts only, and in sharply defined patterns. In printing, wooden blocks, stencils, engraved plates, rollers, or silkscreens are used to place colours on the fabric. Colourants used in printing contain dyes thickened to prevent the colour from spreading by capillary attraction beyond the limits of the pattern or design. Traditional textile printing techniques may be broadly categorised into four styles: Direct printing, in which colourants containing dyes, thickeners, and the mordants or substances necessary for fixing the colour on the cloth are printed in the desired pattern. The printing of a mordant in the desired pattern prior to dyeing cloth; the color adheres only where the mordant was printed. Resist dyeing, in which a wax or other substance is printed onto fabric which is subsequently dyed. The waxed areas do not accept the dye, leaving uncoloured patterns against a coloured ground. Discharge printing, in which a bleaching agent is printed onto previously dyed fabrics to remove some or all of the colour. Resist and discharge techniques were particularly fashionable in the 19th century, as were combination techniques in which indigo resist was used to create blue backgrounds prior to block-printing of other colours. Most modern industrialised printing uses direct printing techniques. Textile recycling Textile recycling is the method of reusing or reprocessing used clothing, fibrous material and clothing scraps from the manufacturing process. Textiles in municipal solid waste are found mainly in discarded clothing, although other sources include furniture, carpets, tires, footwear, and nondurable goods such as sheets and towels. Textiles and leather recycling categories Cotton Recycling Wool Recycling Burlap, Jute and Sisal Recycling Polyurethane Foam Recycling Polyester and Polyester Fiber Recycling Nylon and Nylon Fiber Recycling Other Synthetic Fiber Recycling Carpet Recycling Rags and Wipers Used and Recycled Bags Used Clothing Used Footwear Leather Recycling Textile Recycling Employment Statistics Year Percent of textile recovered in the U.S. 1960 2.8% 1980 6.3% 2005 15.3% Textile preservation Textile preservation refers to the processes by which textiles are cared for and maintained to be preserved from future damage. The field falls under the category of art conservation as well as library preservation, depending on the type of collection. In this case, the concept of textile preservation applies to a wide range of artifacts, including tapestries, carpets, quilts, clothing, flags and curtains, as well as objects which contain textiles, such as upholstered furniture, dolls, and accessories such as fans, parasols, gloves and hats or bonnets. Many of these artifacts require specialized care, often by a professional conservator. Treatments [Embroidered skirts by the Alfaro-Nà ¹Ãƒ ±ez family of Cochas, Peru, using traditional Peruvian embroidery production methods.] Textiles are often dyed, with fabrics available in almost every colour. Coloured designs in textiles can be created by weaving together fibres of different colours , adding coloured stitches to finished fabric (embroidery), creating patterns by resist dyeing methods, tying off areas of cloth and dyeing the rest (tie-dye), or drawing wax designs on cloth and dyeing in between them (batik), or using various printing processes on finished fabric. Woodblock printing, still used in India and elsewhere today, is the oldest of these dating back to at least 220CE in China. Textiles are also sometimes bleached. In this process, the original colour of the textile is removed by chemicals or exposure to sunlight, turning the textile pale or white. Textiles are sometimes finished by chemical processes to change their characteristics More recently, nanomaterials research has led to additional advancements, with companies such as Nano-Tex and NanoHorizons developing permanent treatments based on metallic nanoparticles for making textiles more resistant to things such as water, stains, wrinkles, and pathogens such as bacteria and fungi. Fabric Care Admittedly, laundry is not a beloved chore. The trick is to make clothes care fast and efficient, yet thorough. Poor care shortens the lifespan of apparel. Cutting corners in the laundry room only means spending more time in the dressing room, which wastes both time and money. Science Delivers Smarter Washers and Dryers Consumers seek a lot of performance from their appliances. They want the best possible clothing care in the least amount of time. Some people want precise control over each load, college students just want to pack as much into each load and get the chore done quickly. Engineering advancements have reduced energy and water consumption while improving clothing care from washers and dryers. CCRC studies emerging equipment technologies to evaluate their impact on fabric care and wash chemistries. Using a variety of instruments, Over by can determine what kind of finish was used on a fabric, how much was applied, the fiber content of a fabric, and the effects that these and any number of other factors might have had on a sample. More often than not, Over by can offer specific reasons for a diversity of problems. Uses Textiles have an assortment of uses, the most common of which are for clothing and containers such as bags and baskets. In the household, they are used in carpeting, upholstered furnishings, window shades, towels, covering for tables, beds, and other flat surfaces, and in art. In the workplace, they are used in industrial and scientific processes such as filtering. Miscellaneous uses include flags, backpacks, tents, nets, cleaning devices, such as handkerchiefs; transportation devices such as balloons, kites, sails, and parachutes; strengthening in composite materials such as fibre glass and industrial geotextiles, and smaller cloths are used in washing by soaping up the cloth and washing with it rather than using just soap. Textiles used for industrial purposes, and chosen for characteristics other than their appearance, are commonly referred to as technical textiles. Technical textiles include textile structures for automotive applications, medical textiles (e.g. implants), geotextiles (reinforcement of embankments), a

Racism Essay examples -- Racial Prejudice

Racism Racism has often played a central role in conflicts between groups of people. Racism is the intentional or unintentional use of power to isolate, separate and exploit others as defined in the Webster dictionary. People generally respond to others differently based on what they know, which may include superficial characteristics often associated with race. This paper will express my opinion of how racism will effect America. I will base information from Webster’s definition of Racism, reading assigned for the course, and some of my own ideas on ways to overcome this obstacle as a nation. Racism has historically been defined as the belief that race is the primary determinant of human capacities, that a certain race is inherently superior or inferior to others, and/or that individuals should be treated differently according to their racial designation. Sometimes racism means beliefs, practices, and institutions that discriminate against people based on their perceived or ascribed race. While the sin of racism is an age-old phenomenon based on ignorance, fear, estrangement, and false pride, some of its ugliest manifestations have taken place in our time. Racism and irrational prejudices operate in a vicious circle. Racism is among the worst of ingrained prejudices that characterize sinful human beings. Racism's ultimate goal, according to Fredrickson, is to establish a permanent hierarchal order that, "has two components: difference and power." Dictionaries are not much help in understanding what is meant by the word. They usually define it as the belief that one's own ethnic stock is superior to others, or as the belief that culture and behavior are rooted in race. When Americans speak of racism they mean a great deal more than this. Nevertheless, the dictionary definition of racism is a clue to understanding what Americans do mean. Nussbaum’s argument is logical, in which case it can be stated as: If your first loyalty should be to your own group, then why arbitrarily make this group the one represented by your country? Why not direct your primary allegiance to your own particular tribe or kinship group? After all, if the mere accident of belonging to such and such a group is to be the basis of your moral allegiance, then what makes your country a more logical choice than your sect or tribe or even your family? Where do you draw the line?... ... false belief that "some" races are inherently superior to others because of different skin color, nationality, ethnic or cultural background. RACISM deprives people of their basic human rights, dignity and respect Global change has to start small and travel abroad. If children are taught at an early age that it is ok to mock and stereotype others, when they become in the position to change policy concerning the offensive use of other cultures, is it any wonder why they don't see such use as racism and stereotyping? What I propose is that we look for the seeds of racism in dominant society and we destroy them by replacing with good seeds. We need to replace the seeds of racism with seeds of morality, compassion, love, and mutual respect, which is found in our traditional teachings, so that are children and future my blossom. We will only continue to hurt ourselves by not welcoming diversity. Racial discrimination is an offense against our fellow human beings, who were created in God's image. We must have a evolution of process to make change happen. This is the only cure that will aide the Americans in becoming less racist. Change is not instantaneous nor will it happen over night.

All human beings have a deep need for affection and respect Essay

Do you think that Steinbeck conveys the message that nearly all human beings have a deep need for affection and respect? Yes I do think that Steinbeck conveys the message that nearly all human beings have a deep need for affection and respect because there is a lot of characters in the story that are very lonely and depressed, they need someone to talk to and to discuss their own problems with. Curley’s wife is very lonely and she doesn’t have anyone to talk to. She is the only woman on the ranch and isn’t treated properly. She has a dream to become and actress and she tells us the story about the time she was talking to a man and he told her that he would send her a letter back to become an actress and she is still waiting on the letter. She should be respected and it makes us release it. George and Lennieà ¯Ã‚ ¿Ã‚ ½s dream is to ‘liv of the fata the lanà ¯Ã‚ ¿Ã‚ ½. This means that they dream to buy their own land and be there own boss and work there every day. They also want to be fed from there and Lennie wants to ‘tendà ¯Ã‚ ¿Ã‚ ½ his rabbits. As soon as candy finds out that George and Lennie have a dream, Candy ‘buysà ¯Ã‚ ¿Ã‚ ½ in to it by offering all his savings. Lennie and George are outcasts and exiles, the reason for this is for the fact that they are itinerant workers and they always work together and go everywhere with each other. This makes them outcasts because they always go everywhere together where as compare to other people at that moment in time every one went on their own. Crooks is lonely and no one talks to him, he doesn’t sleep in the bunkhouse with the other ranch-hands because he is black. This shows the racism at this time. When Lennie goes in to his room he tells Lennie to get out of it because he wasn’t allowed in their rooms so why should Lennie be in his room. It shows the way he is rejected from the others and that he has a need for deep affection. Curley is very bossy and he thinks that everyone is afraid of him. He bullies people because this is the way he can talk to people. He thought that he would be able to bully Lennie because Lennie looked stupid and very shy, but after he hit Lennie a few times so as soon as George told Lennie to hit him back he did so. Every person has a need to convey their affection and in Of Mice and Men Steinbecks shows this in different ways, with the different characters.

Hockey Observation Report

Yesterday was the first time bought a ticket to watch a live game of junior hockey. I sat behind the net of Pets for two periods and watched the game. That's a great place to see if London boys are going to shoot the puck into the net or not, but also, it's hard to look at the left way of the rink to follow the game. It was a great time, and it is much better than watching on TV or internet. I can really fell the atmosphere at the stadium and enjoy the game. That was the game that people expected London Knights will get the ten-game winning streak, but London boys were lost before over 9,000 fans atBudweiser Gardens. Subculture Members Senior was the largest group of audiences in Budweiser Gardens. You probably could see them everywhere, and they also are one of biggest fans of London Knights. It's easy to recognize them by their outlooks, drinks they had (mostly were beer for men), clothes (they dressed London Knight Jerseys with old design, not the new one). They have huge knowledg e not only about Indo Knights hockey, but also about other subcultures of hockey: women hockey, NIL, Olympic hockey†¦ Junior and minor also are big parts of fans.They normally had a group of friends and watched the game together. They wore hoodoos or hockey jerseys with jeans and sneakers. You could hear them talk about the game and players that they adore not only London Knights but also other teams from NIL such as Toronto Maple Leaf, Detroit Red wings, Winnipeg Jets Young adults came to the game alone or with their friends. They drank beers, and their outlooks are different with: Jeans, shirts or T-shirts, caps†¦ Beside the topic about London hockey, they also talked about NIL, works, loves, lives†¦ Its not hard to define them with other groups.Families came to the game with their children. They talked to kids bout hockey, players, the rinks, the puck†¦ I believe that a passion Of a kid was developed by their parents, especially their fathers. Kids and then Wi ll become a big fan of hockey and could be a good player too. Beliefs and Values At the last two minutes, after the coach of London decided not to put the goalie on the rink to protect the net after they got the first shot, but another player, Petrography got the chance to shoot the third score in the net of team London. A lot of audiences felt angry and disappointed; they screamed loud.They stood up and left their seats to go home because they believed hat London would lose because no more chances for London to get 3 shots into the net of Petrography to win the game, and finally, Knights' boys were lost. When one player of Petrography had to get in the penalty box and London Knights had a good chance to score, all of audiences that Loon's fans started standing up and chanting: â€Å"Go, Knights go! Go Knights go! † to cheers for the boys because fans believed that London could get one shot for that big chance. They were absolutely right; London boys slapped grateful shot int o the net with all hard try.The scaffold was blow upped by those screams of London fans. Customs and Behaviors Before the game began, everyone stood up and Sang the song â€Å"O Canada†. Almost everybody just stood up and listened to children's choir sing the song, but the man who stood behind me sang it out loud. I could feel that Hess so proud of Canada and also respect to it and all other people. A fan sat right behind the net of Pets punched on the protected glass when London boys missed their shots so many times. He punched and screamed loud: â€Å"Shoot that puck into the net† to show his anger on the boys and the way they played.At the corners of the rink, players of both Pets and London usually push heir rivals into the bar to make them cannot move and get hurt. Therefore, players could create chances to get the puck or help their team mates get the puck to score or protect their goal. Loon's goalie normally went out a little too far from the goal and he stood more on the left of the net. That created chances for Pets boys to get two scores into Loon's net. Lineup is a normal thing but it shows people's behaviors. Audiences waited on the line to get into the arena and also to get out during the break time. People just usually line up to buy foods, tickets†¦ ND other things else, but inning up to go washroom and waiting for quite long time is really polite and culturally. It shows people's good ethics and behaviors. It's absolutely right to say that Canadians are very polite. A London boy broke his stick while he was trying to get the stick from a Pets boy. Then he decided not to care about the stick but moving follow Pets boy to hinder him pass the puck to his team mates. He also tried to get another stick from the other boys when he got a chance. My seat is not the best place to follow all over the rink because it's hard to see what's happening on the left corners at our seats.Teases why every time suck was passed to that place, peo ple normally tried to leaned and moves their body up a bit, so they could watch the game easily; therefore they would not miss if London boys score. Clapping your hands to make applause for your home team is normal thing, but when it's done for Loon's competitor- Pets is a different story. A man that is London Knights' fan, who sat beside my section made applause for Pets boys after they had hit London boys one shot. In my opinion, that was really great shot from the left side of the net, and it should be appreciated not only by Pets fans, but also other people that are not.Almost everyone stood up, clapped their hands, and screamed loud right after London boys got one shoot into Pets' net. That's the way people cheer up for their boys and show their excitations. They kept doing it for a while until the game started again. The referees normally did not move after they dropped the puck until boys get it or shot it far away from him. They do not want their movements affect to the puck ; therefore, players could easily to follow and throw or pass it to their team mates. Social Relationships Few parents came to watch their sons play on the game.They came to enjoy he game and cheer not only for their boys, but also the others too. Taking pictures could not be forgotten because they want to capture the moments that their sons were skating, playing and enjoyed the game. Couple groups of minor players' sibling socializing cam to watch the game of London Knights. They could enjoy watching their favorite sport, but also that could be an example for them to learn how to play, what can be happened, how they can solve problems†¦ They sat together, talked to each other, and commented about the game. A few couples of husband and wife came to watch the game as the way to relax on the weekend.They sat beside each other, shared foods and drinks†¦ During the second break, kiss cam moved around to catch people's kisses and ask people to make kisses. It was wrong for few times when it mixed up two couples and made people laughing. A group of Pets fans came to Budweiser Gardens to support their boys. They sat together and talked about both London and Pets, how they play, about London†¦ They were very happy when Pets beat London boys with ratio 3-1. Some journalists also were there to watch the game and also record about it for London local newspapers. Hind that they watch it more carefully than there people because that they have to write a report later to provide the information about the game for people who did not came to. Institutions and Organizations When got into the gate, saw few groups of minor hockey organization was selling 50-50 tickets for their upcoming game next week. If you buy a ticket at Budweiser Gardens that was sold by minor hockey organization, you just need to pay half of price (it was around 10 bucks), and a lot of people like junior, parents purchased couple tickets for themselves and their kids to enjoy the game while s upport for minor hockey organization.Aluminum Associates sold stuffs of London Knights team such as: hats, stickers, pucks, jerseys†¦ That are provided to Loon's fans. They get involve with Budweiser Gardens to sell things while supporting for London boys and also bring revenue to run the team. Banshee College sold ticket of the game for Banshee students with price that under regular price to bring students to the game. They work with Budweiser to get tickets for students with cheaper price. You probably could see a lot of Banshee students with their tickets that was purchased at Biz Booth. Material GoodsSince I got into the Budweiser Gardens, could see a lot of people wear Indo Knights' jerseys: kids, men, and women, senior†¦ Not only that, they also dressed Knights' hats and scarf. Everything made a wonderful picture of white, yellow and green. A lot of people ate pizza of Pizza Pizza while they were watching the game. During the brake time, the line of people waiting fo r pizza at Pizza Pizza store was as long as other stores'. Pepsi is favorite drink for kids during the game. They also grabbed few bags Of popcorn to get ready for the show. For adult men, they bought a cups or bottle of beer like BudLight or Budweiser with French fried from Harvey's or other brands. In the second breaking time, London Toyota Company showed audiences their two brand new cars for 2014. Everyone kept talking about it for a while until the game start the third period. After the breaks, two girls sat beside me came back with a bag of Lays' chip and a Harvey's' burger. I saw some women and kids wore yellow and green cheer gloves, the main colors of London Knights. There was a kid sat in front of me with a small hockey stick with London Knights' sticker on his hand since the game starts until the end. LanguageI probably have to say that the man sat beside me during the game is one of the craziest fans Of London Knights. He screamed out loud at the guy of Pets, who put a g uy of London team on the rink: â€Å"Shut the f*** up Devils! † He looked very serious and tried to protect the player of the team he likes. â€Å"Go, Knights go! Go, Knights go! † was chanted to cheer up the spirits of players by audiences (kids and seniors almost) when they have good chance to attack and score. The sound kept going around and around with the applause, the sound of the bell from a woman, and the vaguely trumpet.It made both audiences and players feel exciting and happy. Some other young guys from the section beside me got mad when the game almost finished. When London players shot the puck out of the net of Petrography, they screamed: â€Å"That net must have a big hole! † Fans got really angry because London boys missed too many chance to get the puck into the net. When the game almost finished, referees decided to put both players Of Petrography and London into the penalty box because they got fight. The Petrography player yelled at referee: ‘What the h***? Why do I need to go there? ND continued fighting with the boy of London. Both of them finally were eliminated out of the rink. The two boys sat at the 2 lines in front of me attracted me while the discussed about the game and players: â€Å"He should shoot it immediately when he was close to the net, not waiting for others†¦ † They talked about it with a wonderful passion, and they are in live with the game. Ill. Conclusion Attending the game was the great time to relax for the weekend and finish my reading week, but got a bit disappointed because London boys were defeated 3-1 by Petrography Pets.Anyway, enjoyed the game, mingled tit the crowd, and were a part of the game like other London Knights fans. It was a good chance for parents to bring the hockey passion to their kids while showing their passions also. Junior hockey in London is great subculture for everyone who loves Hockey. It is not only the key to help junior players to become a profess ional hockey player, but also, it is the game for people to show their loves to hockey and Loon's team. In addition, London is a door for kids to see that hockey is an important passion of their lives. You cannot have the felling how London fans get crazy until you are a part Of it.